Banshee hydros

[Devilman910]

Im going to get banshee hydros for my blaster this weekend i read a thread saying you have to weld a mount for the master cylinder is this true and is there a way around that

 

[Blaner]

front or rear? or both? the rear will need a place to mount the ressi. the front one will clamp onto your bars

 

[Awk08]

you'll need to have an extension welded to your pedal or an 03+ pedal, the banshee one does not work, you need to have mounting brackets welded to your frame for at least the master cylinder and/or the rezzie, then repaint
and i believe you'll be needin a banshee or 03+ carrier ?????

way more to doin that swap than meets the eye
btw...how much $$$ for the banshee set-up ???

pm sent

 

[Blaner]

sort him out Awk im sure you can help there

 

[Devilman910]

I was getting front and rear until awks pm just getting the fronts now

 

[Awk08]

look for a diy in that section on banshee front brakes, and the reaming of the spindles needed if you use them
i've done front hydro conversions on both my blasters, but i pieced them together,
rappy/banshee stuff and also used the norman420 spindles, so i can't help ya with that reaming part, also i noticed that the banshee hard lines were too long, but i'm sure someone has experience with that, i went a different route

 

[Blasterb0y794]

Save your self the time and aggravation and get the norman spindles. They're awesome and he does some nice work!

 

[blasterdemon7]

Save your self the time and aggravation and get the norman spindles. They're awesome and he does some nice work!

X2. There very well done. They don't look like some home Made deal.

 

[OConnor Racing]

Norman knows his stuff. Great product!