banshee axle

[05blaster3]

will a stock banshee axle mount directly up to an 05 blaster and if so how much would it widen it

 

[EvilElvis]

will a stock banshee axle mount directly up to an 05 blaster and if so how much would it widen it

indeed it will, you will get +3inI:I

 

[blasterdemon7]

Yuuuuuuuuuuuuuuuuuup

 

[05blaster3]

cool is it a big improvement over the stock axle or no?

 

[EvilElvis]

cool is it a big improvement over the stock axle or no?

widening +3 without spacers is always good I:I

 

[EvilElvis]

this is a durablue banshee axle +3

 

[blasterdemon7]

Check out the Banshee forums. You may get lucky like me and do a strait trade deal.

 

[piezzi]

It's a great mod and the extra width makes for additional overall stability....Do It!

 

[05blaster3]

cool ill do it if i can find a really good one for cheap

 

[piezzi]

I found mine locally on CL for $60.

Don't forget to get the brake hub as well.....you'll need it too!

While it's apart, you might as well also install a zirk fitting into the carrier so you can keep it greased up and free of dirt and rust.

 

[dwndak]

I found mine locally on CL for $60.

Don't forget to get the brake hub as well.....you'll need it too!

While it's apart, you might as well also install a zirk fitting into the carrier so you can keep it greased up and free of dirt and rust.

He's got an 05.. direct swap.. no brake hub needed.

 

[05blaster3]

do i need the zirk fitting??

 

[05blaster3]

and if i flipped the front wheels would the back be wider than the front?

 

[Triple_B]

If I HAD a NICKEL!

 

[slickerthanyou]

and if i flipped the front wheels would the back be wider than the front?

No! !

 

[slickerthanyou]

do i need the zirk fitting??

No but a good idea to do!

 

[05blaster3]

so would it be even?

 

[TechBlaster]

so would it be even?

Yup, just about, if you could flip. (pre 2003)
Since you have an 05, you cant flip the fronts, your stems will hit on the hydro cali/hub setup, you would need spacers to flip. (unless you take the tires off and drill the rims for stems on the other side, that would work)

So, your Shee axle will be a bit wider than the front, until you score some extended a-arms to even things up!! I:I

As for the zirk, NOT needed but always a good idea to be able to grease the carrier/bearings, no doubt...

 

[danstafford]

Will it work on a 2000 to ????????

 

[blasterdemon7]

Will it work on a 2000 to ????????

Yuuuuuuuuup. .