banshee axel or wheel spacers WANTED!!!!

The banshee is about 3 1/2" wider than stock, and if you use a 88-02 setup, use the floating brake disk. If you use 03-06 setup, use the fixed brake disk. Sprocket hub is the same.

Good luck finding an axle for $40.....if you really want one go over to BHQ and post up. People have tons of them.
 
The banshee is about 3 1/2" wider than stock, and if you use a 88-02 setup, use the floating brake disk. If you use 03-06 setup, use the fixed brake disk. Sprocket hub is the same.

Good luck finding an axle for $40.....if you really want one go over to BHQ and post up. People have tons of them.

yea i dont think thats worth it.... i have an 01, and ill have to change stuff, and mod, and i dont want to do that....for reasons that if it breaks, than ill have to buy all the parts again and re mod it.... i think im better with the wheel spacers....
 
You won't have to change anything except the axle. Everything that's on your blasty will fit on the shee axle.
 
You won't have to change anything except the axle. Everything that's on your blasty will fit on the shee axle.

yea, but now that i think of it, i will have no way of trailering it to the track... it has to fit in my mom's honda pilot, and if the axel is too ling, i wont be able to revome it as easy as i can for spacers... like the axel and tires cant be wider than my nerf bars are, otherwise it wont fit lol
 
yea, but now that i think of it, i will have no way of trailering it to the track... it has to fit in my mom's honda pilot, and if the axel is too ling, i wont be able to revome it as easy as i can for spacers... like the axel and tires cant be wider than my nerf bars are, otherwise it wont fit lol

Spacers will put you in the same position. Unless you get 1" spacers.
 
depends what kind of spacers you get mine I got longer studs ...if you wanted u cud just throw stock studs back in a spare hub and throw them hubs in an load it like that when you get to the track throw the spacers back on lot easier then a axle...if that makes sense lol
 
depends what kind of spacers you get mine I got longer studs ...if you wanted u cud just throw stock studs back in a spare hub and throw them hubs in an load it like that when you get to the track throw the spacers back on lot easier then a axle...if that makes sense lol

EXACTLY!!!! lmao a bit of work, but u have to do what u have to do i guess


1 1/2 inch spacers on each side is barely shorter then a banshee axle

but i can take them off.... thats y...


and i know they will hold, because i only weigh 116lbs... so i dont think gthere will be much stress
 
Yep I've been jumping mine with spacers an I'm round the same weight..an yes lol there way easier haha so how did u do this racing season I'm mxing mine this year lol this year sounds weird haha
 
Yep I've been jumping mine with spacers an I'm round the same weight..an yes lol there way easier haha so how did u do this racing season I'm mxing mine this year lol this year sounds weird haha

I:I well I'm just getting into racing. I've been riding quads all my life, and about 3 years ago, I had to sell my old quad, cause we moved and also because the diff blew on it and it was way to expansive. I bought my blaster in oct. and I have been on the track once, but unfortunately, the track I went to " Atco" shut down and than the season was over. So I've never got to race yet, but I went to 1 practice race. I'm hoping that I will b able to get to the first race Of the season in English town... So we should see how that goes. Should b fun :)