autolube

[roadkill]

how exactly does the auto lube system work anyway does it mix the oil into the bowl with the gas? or does it squirt it into the intake? i was wondering because mine came already blocked off so i didnt know how it works, if it does wouldnt that mean you have to rejet if you switch to premix because th oil is displacing the gas? jw idk if its been asked before its something thats been bugging me

 

[acezeesawtooth]

it injects it directly into the carburetor where it then mixes with the gas in the bowl before being blown through the intake

 

[Blasterdude27]

And its driving by a whimppy plastic gear. On a 100 percent stock bike its fine, but after you get a pipe the first mod you should do next is pull the gear and plug the brass nipple on the carb then switch to pre-mix.

I never had to rejet but depending the ratio you like you may have to. ( I prefer 32-1 )

 

[roadkill]

ok i was just wondering i have mine gone anyway thanks

 

[sheeblast]

i think the "autolube" runs at a mixture of 20:1 maybe 18:1. when you premix, you shouldn't go above 32:1 on an aircooled motor like the blaster. and you really wont have to rejet the stock carb.