Anyone know how to port the jug of a blaster???
- Thread starter Blasterman96
- Start date
.00001987 on the intake. 2.098765 on the exhaust port. 4 inches on the transfers. This should help you.
I:I
I:I
On a serious note this vid should help you.I am only linking part one but there are more parts to watch.
Last edited by a moderator:
.00001987 on the intake. 2.098765 on the exhaust port. 4 inches on the transfers. This should help you.
Disregard that statement ^
Regard that statement ^
That's a mild portjob he's outlining in the video series. With a properly designed rechambered head, a cylinder done just like the one in the video made 28hp.
^^ disregard this one also. Anyone who tries to take 4 inches out of the transfers should realize it cant happen.You must have mised that part.
.00001987 on the intake. 2.098765 on the exhaust port. 4 inches on the transfers. This should help you.
i believe you are wrong thats almost not opneing them up at all i just opend mine up heres a pic
i believe you are wrong thats almost not opneing them up at all i just opend mine up heres a pic
You still have a few inches to go.
I did not miss anything
i believe you are wrong thats almost not opneing them up at all i just opend mine up heres a pic
^^^ he missed it and hes doing the porting
^^^ he missed it and hes doing the porting
Anybody with tools can ( Say) that they ( Port) !
the height of my intake port is .9 1/2 in on the right port the with of the right port is .8 left height is .92 and the with .8 on the left
The reason y I wanted to know this is because I know someone who ported and polished his motors for his 50 cube pulling tractors so I was wondering if he cud port mine I guess I'll let him practice on my 2nd jug
