almost done
- Thread starter blasterboy 2000
- Start date
freaking amazing
got a video of me riding it.will post as soon as i get it up to youtube
rideing the blaster - YouTube short video i had more but it was just ripping around the yard with no helment so i decided not to put them on here cause i didnt have a helment on the camera died so thats why its short
You said
One does not need to add extra oil for break in, it messes with the air/fuel ratio and causes the motor to run lean on fuel.
The mix you used was approx 29:1, adequate oil but the fuel ratio would have been out by about half a jet size, and on a cold morning may have put you way on the wrong side of lean.
A lean mixture will cook a piston every time.
One does not need to add extra oil for break in, it messes with the air/fuel ratio and causes the motor to run lean on fuel.
The mix you used was approx 29:1, adequate oil but the fuel ratio would have been out by about half a jet size, and on a cold morning may have put you way on the wrong side of lean.
A lean mixture will cook a piston every time.
didnt know that:/ i dont think it was around a onz but was a little more then 10 onz of oil..
You are using a forged piston, were you aware that they require an adequate warm up before riding, especially on a fresh build.
i knew that. i always warm it up before i ride. was taught to let it warm up and wont change that. in the video i was riding 5 mins before i took it so it wasent a cold run
