air screw

[89blaster89]

so if I remember right to get your blaster running at its best were your riding at, you just re adjust the air screw?

 

[Herpderplol]

Set idle a little high (2000 rpm)

Start at 1.5 turns out

Adjust with quarter turns, wait 10 seconds for idle to change

Find the highest idle with the air screw, then you are done. You can turn idle back down

 

[89blaster89]

Set idle a little high (2000 rpm)

Start at 1.5 turns out

Adjust with quarter turns, wait 10 seconds for idle to change

Find the highest idle with the air screw, then you are done. You can turn idle back down

that's not what I was asking -.-

 

[Herpderplol]

that's not what I was asking -.-

Pretty sure it would work, other than changing your jets

 

[Wifesblaster]

Yes it is a good idea to find the highest idle. I adjust mine everytime I ride.

 

[Blaaster]

If you change elevation or temperature, warm up the motor and adjust the idle .

If you change elevation or temperature you will also have to change your jetting/needle setting/oil ratio before you adjust the idle.