air intake tubing? cant find any?

[Blaster200boy]

Can someone send me a link of where i can velocity stack? I ordered the uni, not i need to order the 5 inch velocity stack. please and thanks

 

[brandoz28]

just measure the carb OD and get a straight piece of tubing that's the same OD and a rubber coupler.

 

[Blaster200boy]

Where would i get this tubing at?

 

[1995blaster]

your local hardware tube i made mine today i used spa tube its hard as pvc almost and has a little flex to it

heres mine im gonna do something to it to make it loook better any ideas?

 

[brandoz28]

hardware store, auto parts store, home depot, menards, lowes

 

[Blaster200boy]

can someone post a pic?

 

[1995blaster]

did
i do accept rep points lol

 

[brandoz28]

its pretty simple, you just get a rubber coupler that slips over the end of the carb, and put a piece of tubing on the end of that, and the uni on the end of that

 

[Awk08]

check out this site, all sizes of aluminum tubing, and slilcon adapters too, i run the adapter, very good stuff, and get the clamps from there too, way better than auto store ones......................

http://www.siliconeintakes.com/index.php?osCsid=0c0969dce76cec7e82fc46406401a85a

 

[Blaster200boy]

How much was the hose, hose clamps, and tubing?

 

[Blaster200boy]

your local hardware tube i made mine today i used spa tube its hard as pvc almost and has a little flex to it

heres mine im gonna do something to it to make it loook better any ideas?

Spray paint the piece of PVC Black

 

[1995blaster]

the adapter clamp thing came with the hos clamps and it was 3 and the hose was i thin4 for 6 inchs (i cut it down)

 

[slickerthanyou]

check out this site, all sizes of aluminum tubing, and slilcon adapters too, i run the adapter, very good stuff, and get the clamps from there too, way better than auto store ones......................

Intercooler Pipe Fabrication - Silicone Intake Systems Auto Parts

Have to say there products are the best! Those clamps are super heavy duty! I think $25 shipped is what i paid for the 2.5"-2" silicon reducer and two clamps. I even ordered the wrong size sent it back and had my credit returned in two days! two thumbs up!!I:I