Acerbis handguards

[silverlight]

hello, i have got Acerbis handguards now, but i was hoping any of you had a good suggestion on how i should attach them, would it be any good to move the throttle and clutch box alittle to take it on? or is there any other method.

 

[Cochise]

Do you have the mount kit as well? Most people (including me) mount them beside the throttle housing and beside the headlight switch.

 

[silverlight]

yes i have the mounting kit, so i will need to move the clutch handle and throttle box to set it on? also front brake, will it be any good using the throttle still?

 

[Cochise]

Here is how mine are mounted. The right side is between the throttle housing and the brake master cylinder. The left side is between the clutch lever and rocker box (headlight switch)

 

[silverlight]

oh i see, but to my clutch handle, i got a clutch housing thing, i believe because of the parking brake aswell, but i will see what i can come up with, i will try your method, also get a pic of how it will look, but might be some time till i can try

 

[Cochise]

Do you by any chance have a pic of the mounting kit laid out? You should be able to mount it like mine. If you post a pic of the mounts I will be able to tell you for sure.

 

[silverlight]

this is the front of my blaster, see the little room, dont bother with the handles, i know they are bended and brake very bended
http://img159.imageshack.us/img159/4623/imageshacke.jpg

heres 2 bad quality pics of the mounting system
http://img87.imageshack.us/img87/9436/imageshackt.jpg

http://img11.imageshack.us/img11/7954/imageshacku.jpg

 

[specialized7]

heres how i put mine on.

 

[Cochise]

It should work exactly how I said. But you need to do somthing with your levers first, Those handguards will not clear bent levers.

 

[silverlight]

heres how i put mine on.

thats how i first though, how is it using the throttle and that?

and yeah my levers are pretty bended for sure xD will fix it