A-Arms/SwingArm, and Brakes

[skillet]

OK First, has anyone seen/heard of "The Swing Arm Shop" on ebay? Second, I'm probably going +4 and using a 14T front. Third A Arms. Ball joints are toast. I would like a +4 Set. Who do you Recommend? Burgard? ASR?


Now the biggie. My front shoes are about gone and Its just a waste to put new shoes on it.. I want Hydros, but can't seem to find a set anywhere. Anybody know how much it will cost using new parts? Or if they will fit off of a Warrior, Banshee.... even Raptor?

 

[CC&Fabb]

1) Swing arm shop swingers are decent. Work best for trails and sand, I know a few members have them and have problems with them cracking from jumping with them. I run one and have NO problems with it.

2) Burgard are good, ARS are good. All depends on how much money you want to spend.

3) If you replace your stock drum hubs and adjust your front brake properly you will be able to stop great. I have mine properly adjusted and I can do a stoppie. If you really want to go hydro you can use banshee or warrior set up. You need the spindle, hub and ALL other brake components from that bike. You also have to modify the banshee spindles a bit. Best option would be to wait around and find an 03-up set up off of a blaster. Buying all new hydro set ups is going to cost an arm and a leg. Project Blaster - www.projectblaster.com - The most badass high-performance Blaster business in the world. has a new kit and I think it is running $550.00 for the front and $435.00 for the rear.

Did I answer all of your questions?

 

[HOUND DAWG]

I got a swingarm from swingarm shop no porblems i use it for cc racing

 

[skillet]

I'm 5'10" and ~170lbs and this bastard teeters in turns. +4 with a G-Force Axle? or whats another factory axle thats wider that will fit? And are there any other factory swing arms that are wider that fit? I'm going to get the swing arm franme and a-arm powdercoated silver and new factory plastics and seat cover. I want it to look stock, but not be =P

 

[CC&Fabb]

No other swing arms bolt up. Also a banshee axel is like 2.5" wider than a stock blaster axle.

 

[245stroker]

If you go with burgard a-arms you'll have to ream the spindles to get the ball joints to fit. Asr a-arms bolt right up without any mods. Like fabb said, both sets are good, imo

 

[skillet]

Saying that about the burgards, would I have to ream them with Banshee spindles?

 

[norman420]

Use banshee spindles. I did.