96 blaster

Tommy6101

New Member
Apr 3, 2013
4
0
0
just rebuilt the top end on my blaster and it starts ssecond kick and runs for about fifteen to thirty seconds. My rod and crank and bearings are in pretty good shape as far as I can see. I am pretty sure that my left crank seal is bad cause I have found gas oil in the flywheel side. but like I said it runs and then stops and then wont start back up for like an hour or so. Please HELP!!!
 
First u need to replace that seal, if u run it with that bad seal ur only asking for big trouble. N that may just solve ur problem. Always start with the known bad things, fix them then go on from there
 
Flywheel side seal is pretty easy, but you definitely need the puller. If I had it to do over I would have sprung for the flywheel holder as well, I homemade a holder with a 2by4 and a couple bolts, which worked, but the right tool is always preferrable. The flywheel nut is gonna be on there very tight, a little heat might help getting it off too.
 
That seal is most likely your problem,but just wondering, did you use a new spark plug when you rebulit it? Becouse I had a problem similar to that, it turned out to be cracked insulation in the spark plug causeing the ignition to ground out. Hope this helps you out.
 
well I finally got a puller that fit I pulled the flywheel and the stator all was well there. I fixed the seal and no more leak but it still fires just once then stalls and wont start up again for awhile. This is my first two stroke bike and im not real smart with it. I am starting to wonder if maybe its got something to do with my carb and adjustments. I have recently cleaned it out and put it back on I know its getting a very good spark and plenty of gas but still not sure why my end result always sucks lol. can anyone think of anything else or maybe hook me up with some schooling on the carb and adjustment? Its been bored to forty over so not really sure about how to fix it. I have tried everything I can think of but I dont know everything.
 
will do all of that thanks! and was wondering why none of the pictures will load? just shows a red x
 
will do all of that thanks! and was wondering why none of the pictures will load? just shows a red x

thats strange, maybe a connection problem on your end ?
go into your "User CP" at the top left of every page, click "edit options" and scroll down about 1/2 page to "thread display options" and see if "show images" is highlighted ?
scroll to bottom of page and click "save changes"
 
yeah man its checked. I will try to google it and find out what is going on. Thanks for all the help!