Post pics so everyone can see.there is alot of knowledgeable people on here to helpFirst thing tomorrow morning I'm pulling the plug and pipe off
Post pics so everyone can see.there is alot of knowledgeable people on here to helpFirst thing tomorrow morning I'm pulling the plug and pipe off
Nice find! So I know it's a bit overkill, but check the torque on all your bolts.96 blaster 200 got it home it's bogging and sputtering at full throttle I noticed they put on a cheapo china carburetor no idle set screw on it with a 170 main jet what is a good carburetor to run?
Nice find! So I know it's a bit overkill, but check the torque on all your bolts.
So what type of flange does your FMF have?
- Cylinder Head: 20 ft/lbs
- Cylinder (Jug): 18 ft/lbs
My buddy's had a weird DIY flange that they jammed into the expansion chamber so they could slap it on the exhaust studs. He had a nasty leak from that, so I welded that SOB up and he's got no more leaks.
But definitely look into buying the stock Mikuni VM26SS.
I probably have one of the only stock Blaster's on here, and the stock main jet is a 230.
Do you know what size carb you're running? It might be overkill for yours.
It's not the exact Blaster carb, but it's the same size and its from a DT100.Only had the bike a few days I'm not sure on the flange it doesn't look homemade or anything and the crab was a 28mm I believe the guy said.. the carburetor is cheapo made with no name on it
Yup, that's a cheap knock-off Mikuni. That's for sure.This is the carburetor he put on it
Could you take a photo of your exhaust flange for us?I have a tube of the gray rtv wondering if that will seal off my flange..let it dry for the day or should I get some better sealant
High-temp copper would be the better choice.if you are getting a carb you will still need jets.I have a tube of the gray rtv wondering if that will seal off my flange..let it dry for the day or should I get some better sealant
Did you clean air filter?plug is definitely darkThis is the plug after running for a few mins
Air filter is brand new and spotlessDid you clean air filter?plug is definitely dark
What do you mean by running a few minutes?idle? 1/4 ? 1/2 ? Full throttle[/QUOTEj idling a few mins