30 mm boot for F7 airbox

Whitty21

Member
Apr 15, 2010
4,629
45
84
Small town, ON, Canada
Got an F7 airbox out of 2smokers buddy's part out, and the boot on it right now is for a 34mm, and I still have a 30mm for now

Now I am not sdure on the large side of the boot (the pipe of the airbox) maybe someone could put some input
 
this may be no help but awk always post's up some website that he gets all his rubber fiting stuff from.
 
i don't quite know the site, but jus saying, i don't wanna know where AWK gets his rubbers fitted

Lmao. That was funny.
I'd imagine any sort of sealed and secure tubing would work. I also hear you can heat the boot up and shape it to the size you need? :-/

On a side not, Mikuni makes this flange. Looks as though it just mounts up to the 34mm opening and makes it 30mm. Maybe it could work?
http://www.google.com/products/cata...a=X&ei=9sb6TeeyIYun0AHospiiAw&ved=0CEEQ8wIwAA
 
^^^^^^ That is the place! and you will need 2"X 1.5" Reducer for 30MM.

Hope that you didn't purchase this size, it will never fit.

I have them if you would want to get one, they run $20.00 plus the shipping. It also includes the clamp for the carb as well.
 
Hope that you didn't purchase this size, it will never fit.

I have them if you would want to get one, they run $20.00 plus the shipping. It also includes the clamp for the carb as well.

Yes you are right I miss typed It's 2" X 2.5" and they are only $10 at silicone intakes site and $6.95 shipping which is cheaper than that the price above! I may even have the one I used for my 30mm-FREE!