how hard is it to put a new jug on along wit installin a new piston ..wats everything it requires...can i just take it off and strap on the new one ??
.240
- Thread starter EXtremeRider
- Start date
aite fug it i feel like i can do it.. so i started i removed my pipe and exhaust ..and im havin an issue removin the carb completly...theres a cable connected from the crankcase to the carb ...strugglen to get it out don want to force anything ...wat is this cable ..ps i couldnt seem to find it in the service manual.. and how do i go about removin it?
was it on top of the carb if so thats the tors wire. i would reccomend removing the entire tors system because they were faulty parts that tend to screw up and mess with the throttle and you wont be able to go very fast at all.
yea its on top rite on top where the airbox connects..thts the tors ..and how do i take it off just pull off wit pliers
yea thte cable im talkin about is not the tors ... i removed tht i don kno wat this is? connects from crankcacse to carb anyone?
im am not sure on the exact removal process but i know you remove the wire and go to the throttle on the handlebars take the lid off of it and their should also be a tors wire in that cut and remove that one also
ok tht makes sense the oil line ..i still have the oil injection..is it common to remove the oil injection with biggercarbs such as a 36mm??...
if you make significant changes to the engine on a blaster you should always remove/disable the oil-injection system.
