2006 Race Blaster build
- Thread starter goodman24x
- Start date
I am not sure, I only visit this site, exriders & atvflorida. He is in Oregon and he does drag race some sick banshees. His dad is a top engine builder in the pro sand drag scene is all I know.
the ground clearance looks great but keep in mind there is no motor or rider setting on it. I have to guess the motor weighs about 60lbs and my pilot is right around 96lbs. It will squat more when assembled but they are MGC style arms(Max Ground Clearance)
they are too wide though for woods racers, they ar +4+1. QUad is about 48-49" wide
nice looking build!!! good to see up and coming talented riders running the 2 strokes/blasters at the track.
I just called about a set of those arms and they are sure proud of em at 800 bucks. May have to keep what I got
that should include the double brake lines, chromoly tie rods with heims not ball joints and the arms use 1/2" 32000lb heim joints also.
You will pay that much alone for the straight snyders, then you will have to buy lines and tie rods which you will also have to buy the heims for. not to mention the snyders come with ball joints according to PB site. heims are much better and offer greater travel. ASR uses 28k heims on their best arms.
Not to mention none of these are MGC, just standard straight arms.
You get alot for the $800 and you get direct builder support with any problems.
ATVFOURPLAY offers MGC arms that are $895 and they include the tie rods but no brake lines and they also use regular ball joints not heims.
You have to look at what you are getting adn how serious you are about your build. ASR is the cheapest.
Also you can request any size you want, mine are +4+1, if you only want +3 they may be cheaper.
