Hi guys im currently building a go kart yamaha blaster. I had the go kart when i was younger with a 6hp horizontal shaft drive motor but then my buddy gave me a working 2001 yamaha blaster for free. It ran and everything and already had the oil block off kit but it needed some parts to make it a full working quad. I ordered the parts but never had time to put them on because i thought of putting the go kart and the blaster into one. So now i currently have a blaster powered go kart. The reason i am starting this thread is to kind of just show off my build and my progress. Maybe acquire some more insight along the way on things to do/not do, mods, anything, and also to see if maybe my project will help out other people on theirs. I will do my best to keep it updated and add photos of my progression. So i started with a manco dingo go kart. and a yamaha blaster and put them together. I started this project 2 years ago but then pushed it aside to deal with my other projects but this year i have done more work to it and am determined to get it fully finished. It will have front and back shocks, brakes, lightbars, everything. It will be sweet. Here is a photo album on photobucket of the current progress and state. It is currently running and driving but needs some tuning. This weekend i will be going and getting cables for throttle and clutch and get a new air filter because the stock filter setup will not work since i no longer have the rear part of the frame to hang the airfilter. If anyone has any questions let me know or any criticism let me know. Again this is a project and not done yet so any insight will be helpful. Thanks!
http://s1110.photobucket.com/user/bmxanrchy127/library/Manco%20Dingo%20285%20Build
http://s1110.photobucket.com/user/bmxanrchy127/library/Manco%20Dingo%20285%20Build