02 blaster sparks gone...

[370]

trace all the wiring check for loose conections... and you don't need a flywheel puller to check coil resistance in the stator. you should be able to get an ohm meter at and hardware store..

 

[370]

New plug= Fail.
Diffrent CDI= Fail.
Diffrent Coil= Fail.

Means bad stator,money i dont have and tools i dont have.

Im done with blasters all it does is cause me problems.

sounds like you got a bad apple ro maybe a quad somebody didn't take care of very well.. nto because of this problem.. this can happen to ANY quad.. but i saw people sayign you had a hard time with this quad since you bought it... blasters are usually die hard quads..

 

[Cmh156]

does this have the parking brake sensor? if so, that could also be a problem. on your stator plate theres 2 coils. one is a lighting one, the other one may be f*cked, theres also a little pickup, thats for the cdi crap that may be shot. take your flywheel off check for any lose or broken wires, clean all grounds on the quad, maybe tors is screwing this up.

No parking brake,no tors no oil injection if you seen my sig.

Im going to take the flywheel and stator off and such check connections and all that.

 

[370]

beforwe you tear into it. get an ohm meter and check the stator coil resistance. both source coil and pickup coil.. might save ya some aggrevation.. i've done a few stators on blasters.. they get old and they fail.. especailly blasters that sit a very long time..

 

[Cmh156]

beforwe you tear into it. get an ohm meter and check the stator coil resistance. both source coil and pickup coil.. might save ya some aggrevation.. i've done a few stators on blasters.. they get old and they fail.. especailly blasters that sit a very long time..

My blaster never sits for more than 2 days,i ride it everyday.

 

[370]

i wasn't saying yours sits a long time.. just sayign that bikes that sit around stator winding deteriorate on them.. seen it a few times over the years..

 

[Cmh156]

i wasn't saying yours sits a long time.. just sayign that bikes that sit around stator winding deteriorate on them.. seen it a few times over the years..

Ok,im going to clean the grounds,check the wire connections and see if the problem is there,if not than it has to be the stator and my friend got one i can use.

 

[370]

you'll need a flywheel puller.. youi know how to use one?

 

[Cmh156]

you'll need a flywheel puller.. youi know how to use one?

My shops taking it off for free.

 

[370]

well aren't you a lucky duck.... for future use.. spend the $12 on a puller.. it'll pay for itself 10 fold bro..