electrical

Okay, so first off this is completely new to me however I’m mechanically inclined. So I blew a piston and it went right out the back exhaust and rebuilt the entire engine, everything on the top end is brand new I followed YouTube videos/manuals on proper way to build it and time it. So onto my...

Ok so i finished rebuilding my blaster after destroying the top end( new top end is ported and polished with a shaved head) I also replaced all the seals while i had it apart. but my problem is i put the motor in and it started up 2nd kick however it doesn't idle and bogs down and smokes and has...

I have a 2003 Yamaha blaster, and about 5 years ago I cracked the crankcase left by the shift lever. Now that I find myself with more time and money I have decided to try to fix it back up. I got the bike working and I got everything right (except I need to adjust the clutch because it keeps...

Hi all, I just bought a 2000 Blaster I could use some help with. I’m a little familiar with them as among my family we have a total of 4 blasters but this one is a little unique. One of the previous owners had put a brand new carburetor on it, and the guy I bought it from never really had time...

Hey guys, I am absolutely stumped on this one. My 96 blaster with an oil pump delete and still has tors lost spark when I replaced the 3 wire wire connection that goes to the headlight switch with individual connections. The cause for replacement was the old connection got rusty and my light bar...

I have two blasters. Id like to put my 03 240 motor in my 88-02 blaster. can I just swap electric? can I replace the 03 stator and harness and electric parts with 88-02 stator harness and electric etc? basically the 88 is in better condition than the 03 but the 03 has a better motor and engine...

My 2000 yamaha blaster has no spark and I can’t figure out what’s wrong with it, one morning I went to start my blaster after having it sit for 2 weeks and I kicked it the first time and it made the usual turn over sound but didn’t start, I kicked it again and nothing at all I tried kicking it...

will an 89 blaster run with the tors wires unplugged or do you have to cut and cross the wires my blaster was running great untill i messed with the screw untop of the tors one day and i ended up stripping it Before it stopped running the throttle would give it little to no power barely making...