i was wondering if theres a way to mount these to the stock a arms.... also if there isnt would i need +2+1 or +3+1 arms?
yfz front shocks
- Thread starter 98blasterworked
- Start date
search buttons does wonders on here! doesnt matter whether u get get longer arms the shock location will be in the same spot , so you will need to get some LONG travel arms which moves the shock mount location further down the arm accepting the longer shocks. or u can get some lowering blocks for the arms then u can run the shocks, you can back the preload all the way off and run them couple people on here run em that way and like it, or one guy on here welded some new mounts for the shocks u can use the search button and find his post about em and thats about it.
/\/\/\/\/\ daaaauuuumn, somebody's grumpy today, hahahahaa
i have yfz works triple rates on my sons stock arms right now, but will be getting cfm lowering blocks sometime in the near future, they have the ball joints on too much of an angle, but they do fit with some force, i had to ratchet strap them compressed to get them in there, bat damn with the 250r rear shock that things lands like a dream
i have yfz works triple rates on my sons stock arms right now, but will be getting cfm lowering blocks sometime in the near future, they have the ball joints on too much of an angle, but they do fit with some force, i had to ratchet strap them compressed to get them in there, bat damn with the 250r rear shock that things lands like a dream
if u can weld good and drill straight and have some spare time, u can take some 2x36 3/16" flat stock, weld up some mounts on there, and set eh shocks all tyh way soft, iluuv mine like that, but yeah, the search does do wonders
