would honda big red or atc 200 rear tires fit on a blaster?

[Vermont Woods]

If you have already found my last thread about looking for big tires... you know i want the largest tires i can get that will clear the rear of my blaster without over doing it... as most of you said go with a 22" rear. I came across a deal on some honda big red/atc 200 stock rear tires... and they are really big and beefy.. will those rims/ bolt pattern and everything simply bolt right up? or will I have to take them off and mount them on blaster rims? has anybody done this swap or am I the first?

 

[Awk08]

back in the late 90's, i took the 22" wooley boogers off of my 87 200x, put them on my '96 blaster rims and the junk cheng shins on the 200x to sell, the tires do swap, but not sure about the rims, i dont think

 

[Vermont Woods]

yeah i found 3 tires mounted on rims for 40.00

 

[Vermont Woods]

this is going to be a budget blaster for sure... the wife doesn't want me spending a lot of money (well none really) hence me trading for a blaster... I have a lot of cool stuff a lot new, and a lot used that i am going to be looking to trade for aftermarket parts once i do end up getting the blaster, such as dg header pipe and silencer, dg nerfs, dg bumper so it can be just like my old blaster.

 

[MXsandracer]

the 200x rims will NOT bolt up to the blaster hubs. the only other machine with the same bolt pattern as the blaster is the yamaha tri-z

 

[Vermont Woods]

hmmm good to know thanks for the info! I will have to keep an eye out.

 

[MXsandracer]

another way to go is get a set of shee hubs and you'll be able to use rims from most yamaha sport quads..

 

[Blaster200boy]

INstead of getting a DG, get a better pipe, even though it might be a budget blaster, there are still better deals out there on a good used toomey, power pros, or any other pipe besides DG, FMF, and PC...(pro Circuit)

 

[ghoegler]

you gotta be carefull tho about the actual tire size on the 3 wheeler tires because my buddy and i had found a set in my neighbors attic and the bolt patter worked but with the height and with you would have to cut some plastic. if i can figure out what tire size he has now ill let you know cuz hes just about at the limit before some surgery mus occur lol

 

[brandoz28]

get an FMF pipe over a DG, you can get them cheap all over and it's a MUCH better pipe