Won't run right

[GIXER7502006]

Did the running change when u fixed the air leak or is it still the same ?

 

[joshrabbitt14]

Ran a little different didn't hang revs. But it's still not running good it's definitely a carb problem, should I try moving the needle clip?

 

[scotj77]

if your tors is still all hooked up electrically it can screw all sorts of stuff up if it is goin haywire

 

[hudack]

did you mess with your air screw at all ????

 

[joshrabbitt14]

So it could be electrical? Cause I have no ignition and the killswitch works when it's on and off

 

[blasterfreek30]

it defenetly sounds like the damn TOR junk..it causes nothing but problems

 

[EvilElvis]

I hate to reccomend this but sounds like a lower end compression leak clutch side ...you can actually lose compression through the crank seals, if you lose it from the stator side its obvious you will see loads of oil, clutch side is difficult to detect

 

[roadkill]

are you really running a 35mm carb like it says in your sig? if you are that sounds waaaayyyy too big for your mods

 

[joshrabbitt14]

No I'm running stock carb. This is a different blaster that I got and rebuilt.