gettin readt to do my bottom end and was wondering everyones thoughts on wiseco crank assy..are they any good? anyone had any bad experiences with them...thanks for any input
wiseco crank
- Thread starter mpit
- Start date
have it sent directly to ken oconnor to have it trued before you install it. most cranks come out of wack from the factory. he will do it for cheap. worth every penny. I have heard some bad stories about all am cranks
1 in 10,000 cranks will be wonky enough from the factory to cause a problem. 1 in 1,000 will be knocked wonky by UPS drop kicking them across the loading dock.
Guess what, the same UPS loading dock attendant who will drop kick it across the loading dock on it's way from the manufacturer will handle it on its way back from Ken. LOL Odds aren't in your favor even if it touched by Ken O'
Guess what, the same UPS loading dock attendant who will drop kick it across the loading dock on it's way from the manufacturer will handle it on its way back from Ken. LOL Odds aren't in your favor even if it touched by Ken O'
arnt hot rods the only one that come balanced from the factory? also why not get a stroker while your rebuilding it?
do we really want to open this whole can of worms. just let the dude replace his crank before he has 2 grand worth of crap to buy to complete the stroker mods
ken does not ship his shizzle in the same box it arrived to him in, he double insulates everything i have ever gotten from him
i'd trust his shipments if the "drop kick murphy's" delivered it by horse and buggy !!!!!!
i've sent 2 motors and 3 cylinders to him, they always came back in better packing than i sent them in
i'd trust his shipments if the "drop kick murphy's" delivered it by horse and buggy !!!!!!
i've sent 2 motors and 3 cylinders to him, they always came back in better packing than i sent them in
sh*t just get u a +3 stroker and spend the money on the head mod, porting and have ken true it up, then u will have u a monster on ur hands, probably cost u about 5-600 but i would get a quote from ken, but worth the money man.
don't forget carb exhaust and all the other hundreds of dollars to go with it. lol. that is why i didn't want to start that sequence of events. lol
wont be much over 6 bud, u figure he could get a good carb for 75 and used exhaust for 200 easy or less
now what about the extended swinger+chain+brakeline to keep those front tires down. come on man you know where a stroker leads. lol
im talkin absolutely needed, the swinger is a want, i didnt NEED to put a +5 swinger on mine or a +3 on the other one, i wanted to, lol
but yes i do know what ur sayin
but yes i do know what ur sayin
I got about $450 if I do a lot of the work myself. I'd only go to ken if I need porting and mebey truing If I want it done in a day and a half with me I'd just take my time to make shure it's done right to save some loot just sayin.
