wisceo crank

[crouch]

what wud a +4mm wisceo crank do for me wit a wisceo piston???
will it fit in the stock head???
thanks
anto..

 

[Wildcard2]

Well, there's about two ways to go about this. You can either have your head rechambered for the new stroke or run spacers to move the head and/ or cylinder up. It is highly recommended to have the cylinder ported to match the new stroke.

 

[quam]

reporting is almost a must for that much stroke. seems to me like the spacer would f*ck the tuning all up.
i think you've also got to trench the case for a 4 over.

 

[blasterfreek30]

yes the case has to be trenched for the +4 crank

 

[alkyblaster4mill]

Yes with the hot rods 4mm you will have to have the cases trenched and also have to have 2mm took out of the head also just put a 4 mill in my blaster

 

[crouch]

thanks,wud a stock bottom end fit on a 240cc vitos kit ???? and what else is needed to run a vitos kit???

 

[alkyblaster4mill]

yes the vitos is just a bolt on kit they also have a 3mm crank that comes with a spacer so you don't have to do the head or the cases

 

[crouch]

and can i change the piston on the vitos crank to a wisceo if i want????

 

[alkyblaster4mill]

yes you can

 

[crouch]

thanks and wud i need a bigger carb? and what other parts to run 1???

 

[coreyownz]

nothing just rejet

 

[Valhalla]

every one of your questions have been answered in detail if you take the time to look around. welcome to the site.

 

[coreyownz]

yo valhalla u bought clovers elkas?

 

[Valhalla]

yup. they will go well with those +4+1 a-arms that i bought off of tjsdaname