Wiring

[Blasterb0y794]

Well i finally got my new stator. i was all excited till i found out once again, NO SPARK! i checked all my wires and they have current flowing through them. could it be my on/off run switch? i have my wiring harness off right now, but can i totally just cute the TORS wires off? thanks!

 

[245stroker]

unplug your on/off switch and see if it has spark. It could be grounding out on the handlebars

 

[bmfv-twin]

Great forum......
Ok here's my conundrum I traded my pickup for a 2000ish Blaster he couldn't get a spark he replaced the cdi and the stator(maybe)I don't know if he wired it up wrong or if the stator is no good if anyone could post a pic of a stator wired correctly I could eliminate that as a problem,I pretty much cut out the unessesary wires(tors etc...)
Thank You in advance

 

[royalt67]

Most people start their own thread rather than resurecting something this old, but welcome to the forum!

As for your problem, the first place to start is with the downloadable manual. On about page 7-9 you will find the section on ignition tests and a wiring diagram. Give that a look, test some stuff with a digital meter, and get back to us. www.rydindirty.com/blastermanual.pdf