Wiring...

bsoin81

New Member
Jun 7, 2009
3
0
0
I am new to Blasters. I removed the old throttle and the box that it ran to before going into the carb. i put a new throttle and carb on that didnt have that box. what do i do with the two wires. my problem is that its all put back together but i have no spark.... i would really like to have the only wire on the whole blaster being the spark plug wire.... any ideas?
 
NVM solved my own problem. the TOR was still connected at the brain and i cut those wires and had spark again.... idk if that makes sense because i dont really understand the tors system but it works now