snakedoctor99 New Member Apr 3, 2009 58 0 6 Peebles, Oh Nov 5, 2009 #1 If I bore my motor out and don't change the jets can that blow my motor. I'm runnin stock jets on a motor bored .50 over. Thanks.
If I bore my motor out and don't change the jets can that blow my motor. I'm runnin stock jets on a motor bored .50 over. Thanks.
blasterdude14 New Member Apr 28, 2009 4,168 27 0 ohio Nov 5, 2009 #2 you should be perfectly fine with stock. when you start getting mods like pipes then you need to change the jets
you should be perfectly fine with stock. when you start getting mods like pipes then you need to change the jets
foolish913 New Member May 13, 2008 807 5 0 kansas city Nov 5, 2009 #3 if it was me i would do a plug chop to make sure its a whole lot easier than a topend rebuild
J4M1E333 New Member Oct 11, 2009 290 7 0 North Wales Nov 6, 2009 #4 yeah i'd go for a plug chop. great sticky in the engine section on how to do this.
snakedoctor99 New Member Apr 3, 2009 58 0 6 Peebles, Oh Nov 7, 2009 #5 Ok thanks guys I'll try the plug chop.