Now im confused between getting the +4mm Hot Rods crankshaft OR the +3mm Vitos crankshaft.
Which one is better OVERALL in terms of performance and reliability?
Which one is better OVERALL in terms of performance and reliability?
Which is better in terms of reliability and performance?
- Thread starter blasterdubai
- Start date
as far as reliability i would consider them the same once you had them trued and balanced. if you dont plan on getting it balanced i would go with the hotrods but you need your cases trenched.
I like the +4 over the Vitos. The big end of the Vito connecting rod is smaller in diameter than the +4. As a matter of fact, all Vitos connecting rod big ends are smaller. This is how we can get away with a +3 without case trenching.
Ya I talked to this guy who completely fixed my Banshee before (seized engine for 3 years..) and he said that he could do all the machining stuff I just want to know which one is better for the performance of my bike.
He can also match the ports
I guess ill go with the +4mm then, thanks.
But when i get the liquid cooled head do i have to modify it in any way?
not if your builder uses a spacer plate for the stroker instead of cutting the head wich i assume he does.
That liquid cooled head has a removable dome which means he may not be able to chuck it up in a lathe to cut it down.
Similar threads
