where are the jets at

[blaster195]

i would like to know where the jets are at and how to jet i seeen the diy of it but it really didnt tell me anything and do i need to take the carb off i really need to know so i wont blow my blaster up with my toomey

how can you tell if your your top end is gone

 

[hickskateboarder]

jet is on the bottom of the carb. it's easiest to work on the carb if you take it off, but you don't have to, you can just loosen the clamps and turn the carb sideways. make sure you turn the petcock off so all your gas doesn't come spilling out, then take the 4 screws out of the bottom of the carb and take the bowl off. the main jet is right in the middle. its brass and hex shaped.

check the compression to see if your top end is alright. should be like 120, if its below 100 you need a rebuild.

 

[blaster195]

would it be easyier to kick

 

[blastermaster85]

would it be easyier to kick

do you mean it feels very soft when you kick

 

[blaster195]

yea and would it be sluggish