what other modds

[06blasterboy06]

what are the cheaps modds for motor i have air box done to it jetted carb bore .8 over what the next step

 

[NOVIS]

power = money .

 

[06blasterboy06]

im not talk about thousaands of dollars

 

[NOVIS]

just sayin bro. nothing is really "cheap" unless you buy it used. but a pipe and silencer along with an air filter is a good start. air filters are cheap but really dont make any noticable difference.

 

[Blaner]

im just curious, you have over 200 posts, havent you seen what can be done on here yet? get yourself an exhaust, reeds, porting $$ is the only limiting factor

 

[blasterkiidirl]

porting is a cheap of getting more power way if ur skilled u should see ken o Conor vid on how to do it your self but u would be far better off to get a pro to do it will cost u a bit but the extra power is worth it and if u really want 2 get the most out of the port job u should get a bigger carb i would go wit a 28mm carb for a mild port job and u can get the head mill and worked and this will incress compression but u will have to add octane to ur premix or buy higher octane fuel but apart form that u already did there i no really cheap way to get more power

 

[blasterkiidirl]

Oh u should change ur reeds i would go with V-Force reeds

 

[06blasterboy06]

i see other peolpe post but there is new stuff that comes out i like to here what people think

 

[hudack]

a new pipe would wake it up new reed cage get the head redisgned and it will be like a completly quad as far as power but i would do something with the suspesion also

 

[bagds101]

it doesnt take thousands of dollars. exhaust is roughly 300-400, porting is like 200 through ken o connor, air filter like 15... the only thing that will cost you alot is things like a big bore kit, suspension, wheels and tires... check your local craigslist for cheap blaster parts. thats where i always find all mine.

 

[super noober]

sounds like you have the basics covered man, the only freebie i can see left is a timing mod after that stuff starts to cost money. but play it smart and be patient.. most are surprised to learn i have only about $22-2500 into mine total. BUT i have built it up over the course of 2yrs, just be patient and work hard.

 

[06blasterboy06]

sounds like you have the basics covered man, the only freebie i can see left is a timing mod after that stuff starts to cost money. but play it smart and be patient.. most are surprised to learn i have only about $22-2500 into mine total. BUT i have built it up over the course of 2yrs, just be patient and work hard.

i was looking ant the timming on it and how does timming work do u no i seen the one on ebay it has like 4 diffrent deg