vitos high compression gaskets

[roadkill]

if i get these wont it affect port timing? and if it did what kind of power would it be? and would it be safe to run with 0=4 timing, and pump gas (93) and the mods in my sig?

 

[scotj77]

Isn't that just a thinner head gasket. I wouldn't use their base gasket. the oem one is the only base gasket i trust. you should be fine with the mods you have it will just up the compression alittle. not enough to worry about your gas.

 

[blasterdemon7]

Get you head milled. Much better way.

 

[Awk08]

i wouldnt run anything vito's makes, it's all garbage

 

[brandoz28]

my blaster had that setup in it, blew out that base gasket in a hurry, its much much thinner and a completely different material than stock


i would have the head redesigned, not just milled, and get much much better results

 

[blasterfreek30]

i wouldnt run anything vito's makes, it's all garbage

couldnt have said it better myself man

 

[Dude]

couldnt have said it better myself man

Indeed it's all the suck.

 

[hudack]

couldnt have said it better myself man

agreed you should see the high compresion vitos base gasket i got didnt even look like it tryed to seal the only thing im ever buying vitos againb is a stroker crank and then its going to ken