does anyone here have the vito's carbon flex reeds that can tell me wat order do the pieces go? (such as reeds, the clear piece, then the little metal piece)
Vito's Carbon Flex Reeds??
- Thread starter 01_Blaster_92
- Start date
i installed them also, i put the reeds, then the plastic, didn't bother with the metal piece, i thought the plastic piece took over the metal piece?
did you have to rejet yours with the spacer, reeds, i also have a vitos high flow filter.
i am having trouble getting it to start after i installed the reeds and spacer...did you have to rejet your carb?
turn your ai/ful screw all the way in, then turn it 1 1/2 turns out, check your plug it could be fouled? you will probably have to rejet it because mine is running rich and won't run well, haven't done it yet, but i do reccomend doing a 250 main.
yeah you need to rejet it, i would put a smaller main in it, that sounds a little big, you haver an aftermarket filter, so i would start at a 290, and go from there
I have the vito's 2 stage reeds and the clear plastic piece should be first with the petals mounted over it, then the metal piece. If the pieces are mounted the opposite way then they are not working in the 2 stages.
