Vf3 and vf4 comparison pics

[motoman159]

here are some comparison pics between the new VFORCE 4 and the old VFORCE 3

front

the 4's front

the 3's front

 

[blasterdemon7]

Thanks for the pics.

 

[speedemon17]

man i wanted pics from the back

 

[motoman159]

man i wanted pics from the back

Forgot to post that one man!!

 

[speedemon17]

thsnk you thank you thank you tht pics was heavily needed for me

 

[speedemon17]

get your butt off the forum and start riding and give me a report

 

[Awk08]

nice pics moto, the loss of the restricting nozzle and the addition of the reed stops should help them perform even better, and help the petals to last even longer than the 3's did

 

[speedemon17]

awk post up a pic of the ported vf3 u had i am trying to decided if it is worth porting the 125 reeds or not

 

[BGATZ]

where did you get these for the blaster i recently saw they came out cant seem to find them would like to get from rockymountain not ebay and i have VF3 would it be a good upgrade to jump to the 4

 

[general_lee]

here are some comparison pics between the new VFORCE 4 and the old VFORCE 3

front

the 4's front

the 3's front

So whats the hp diference between both? Any dyno sheets comparing both?. Nicer looking reeds dosent make em faster

 

[DirtBlaster03]

So whats the hp diference between both? Any dyno sheets comparing both?. Nicer looking reeds dosent make em faster

Probably not gonna see a huge gain in power, at least you won't be able to feel it. Snappy throttle response is what we're after here.

 

[motoman159]

Probably not gonna see a huge gain in power, at least you won't be able to feel it. Snappy throttle response is what we're after here.

Now my vforce3'a were worn out so when I put the 4's in the response was absolutely amazing

 

[Awk08]

VF3 vs. VF4 dyno runs...........

the 4's appear to give some gain across the entire range, and +3hp. peak, over the 3's !!!!

 

[Blasterr]

Nice pics AWK! Better than comparison pics!

 

[Awk08]

Nice pics AWK! Better than comparison pics!

take note: thats on a 10mm cheetah cub banshee,
can you expect +3hp. on a blaster ?...prolly not, but should gain something.
and also that the runs were made back to back 20 minutes apart < just enuf time to swap out some reedcages !

 

[89blaster89]

well im happy with my 3's better than stock and i got em at a killer deal

 

[Akraus5]

VF3 vs. VF4 dyno runs...........

the 4's appear to give some gain across the entire range, and +3hp. peak, over the 3's !!!!

I know this post is older, but can you imagine driving one of those things? I would get knocked off.