tried a leak down test...wow

[6mmedic]

I made my leakdown tester and found the following...air blew out of the crankcase vent line and out of the crack i found in the clutch cover...seals right? Crackcase wouldnt hold any pressure at all!!! Wow and it still ran!

 

[6mmedic]

update

Replaced the clutch seal...looked like crap. Bad new is still wont hold any air. Gonna try the flywheel side tomorrow then it sounds like a case split...ugh

 

[peacher213]

No case splitting required, I drilled 2 small holes in the seal, careful not to hit the brearing behind it. Then pulled it with needle nose pliers

 

[6mmedic]

No case splitting required, I drilled 2 small holes in the seal, careful not to hit the brearing behind it. Then pulled it with needle nose pliers

i mean if the seals dont fix it