Trenga Carb Problems

[01_Blaster_92]

I just recently bought some new Vito's Carbon Flex Reeds and a Vito's reed spacer. the same day that i installed the parts, i went to go test them out, everything was working fine. the next day, four of my friends and i went riding. about half an hour later, my bike bogged out so i took it back home to see what was wrong and it turned out that the spark plug was soaking in gas...does anyone have an idea on how to fix this problem?? thanks

 

[hickskateboarder]

did you check for spark?

 

[01_Blaster_92]

yes, it does have spark, but after a while of leaving it running, the spark plug gets filled with gas...i know its the carb that needs adjusting, i just dont know how to adjust a Trenga carb (where the fuel and idle screw is located)

 

[FLOTEK]

the reeds probably made it rich, it then fouled the plug ,you need to change the main jet and possibly the needle clip adjustment as well to lean it out some ,read up on your carb i n the provided instructions or go to keihins website

 

[01_Blaster_92]

thanks for the help, ill look into it