Trail Tech Vapor

Jezzowhat

New Member
Apr 21, 2009
79
0
0
Utah
Finally got around to installing the Vapor.Easy enough.My Blaster is a '92 so it has the drum brakes,I actually ordered the kit for the disc brake model and modded the bracket for the mph sensor and also used the magnetic bolt instead of the pancake magnet supplied with the drum brake kit.Just needed to drill and tap a few holes.All I need to do now is get some heat shrink tubeing to put over the connectors at the Vapor unit itself.Seems to work fine-I'll see over time.I did not add a battery to the Blaster,I ran the power right off the Blaster stator, the Unit powers up when the Blaster is started and the units on-board pancake battery functions when the Blaster is shut off to retain data settings.

cht.jpg
Cylinder head temp sender

rpmcopy.jpg
rpm sender wire hooked to coil

spd.jpg
mph sensor and pickup

f1.jpg
Vapor mounted

f2.jpg
Vapor mounted
 
This is mine installed, just have to figure out how to run the power wire to the stator, lol. More pics to come when there's more daylight.

IMG_2887.jpg
 
i dont understand how they work but i want one jut to know how fast i can go. would be neat for comparing gearing and before and after mods

i really want a set of those timing cones i saw a dude sell a while back too