tors system help...

[cirame1]

hi i have an 03' blaster and i removed my old carb with the tors unit on it and unplugged the wires off it it. i put in a mikuni flat side carb and i cant get it to run right. i unplugged the wire coming out of the throttle and then i realized the ebrake had wires from the tors on it to. i stretched the blaster so i eliminated the ebrake so i also disconeccted the wires on the ebrake. now do i have to splice any of these wires or just remove them all together or wat? please help thanks...

 

[cirame1]

well i actually got it running on the 03' with no tors you have to unplug the park brake wire and leave in the throttle box wires for the tors!!! but now it wont idle so still working on it...

 

[rad-blaster230]

dude

well i actually got it running on the 03' with no tors you have to unplug the park brake wire and leave in the throttle box wires for the tors!!! but now it wont idle so still working on it...

OK i just got done fixing that on my blasty 20min ago. i connected the 2 wires coming from the red button in the trottle box, it it runs like new!

 

[01blasterdude]

on the 03, im not sure what you have to do differently than the standard older blasters, but the cdi and TORS may be combined, I think I read that somewere.

 

[cirame1]

yeah i dont think theres a brain so cant fully remove my system and im actually gonna have to splice the throttle box wires together and possibly leave out my ebrake tors wires b/c i dont have one anymore i extended my swingarm. we will see how it goes this weekend.