This is what has been taking up all my time!!!
- Thread starter Wifesblaster
- Start date
Not really. The pictures might make it look bigger. It's only 25'. Between the two boats and everything else going on free time is getting to be hard to find. Luckily I have some good friends that like to lend a hand.
(worst thing ever ! )
We use this boat to cruise around the bay and bar hop. Sometimes we stay the night on it. The boat in my sig is going to be made to rip up and down the river at 70mph in a 19' boat with thu hull exhaust!
Break Out Another Thousand !! Nice boat.I bet you have a blast on it. How long have you had this one?
That's exactly what it stands for. It's either the gas pump or the maintenance that makes you break it out! I've had the bigger one for 3 years and the smaller one for 2 years. I had to redue the floor in the. Smaller one.
What about free shee?
What about phragle's old quads?
I think quads are better than boat, but then again, i dont care for water 8-|
What about phragle's old quads?
I think quads are better than boat, but then again, i dont care for water 8-|
I'm trying to make time for them all. My family is getting boating fever though. Nothing like pulling up to a tiki bar and drinking some orange crushes on a 95 degree day!
I sold him my quads to put money in my boat..... Make sure the gimble and tiller arm are tight, 70 seems to be the magic number on a boat that if anything in the steering system is worn, it gets ugly quick.
Hey Phrangle. I just put a gimbal bearing in the bigger boat. When I get cracking on the smaller one it's going to get manifolds/risors, recirculating pump, impeller, ignition tune up, and I'm sure there will be more.
what's it got for an outdrive? I work on rhibs with bravo 2 with a cummins 5.9bt in it, talk about indestructible!!! so u ever need any help with it let me know.
It's got the mercruiser 5.7 with a bravo 2 outdrive. I might be replacing the lower shift cable. My Dad is coming over to look at it tonight. I'm thinking it's a bad cable or a bent shift fork in the outdrive, most likely the cable though. It will not go in gear with the lower cable hooked to shift linkage, if I unhook it it works fine. That tells me it's the cable or outdrive.
NICE BOAT man!!! About 2 years in lake George my best bud and about 10 of my close friends sunk a 30 foot bayliner. I was the only one of the group not on that boat. I was in my 14 foot jonboat lol. I was throwing life jackets left and right i had 6 on my boat and don't know why. I saved two youngsters though. Every one ended up ok thank God. All the while i was just putting along in my flat bottom boat with an old 70`s johnson 4.5 horse power 2stroke motor i just rebuilt. It took me a long while to get to the island for camping but i made it. That place is beautiful.. wish i had a boat like yours to take up there.. the bathing suits look even better on a big boat lol..
