TAKING OFF OIL PUMP

[akinmond]

once you take the oil pump gear off take out the shaft and seal and clean the hole up good, then fill it up with JB weld.

 

[YamahaBlaster03]

with mine i disconnected the wires to the tank, cut the hoses where they run into the oil pump and sealed them and then covered the spot where the hose goes into the carb

 

[piezzi]

There's a DIY thread posted that explains how to disable the stock oiling system. Here's the URL:


http://www.blasterforum.com/do-yourself-20/how-remove-oil-injection-without-block-off-kit-3272/