swingarm

[hudack]

well i wana get a new swingarm cuz im puting a good bit of money in the motor and with the parts i got now the tires come off the ground 1st threw 3rd but i found two and there pretty cheap says 1 year warranty on both them but idk heres one +3 BLASTER Round Housing Swingarm Yamaha mx Swing arm : eBay Motors (item 250607802080 end time May-01-10 04:55:17 PDT) seems kinda cheap to me and heres the other ohttp://cgi.ebay.com/ebaymotors/3-4-6-8-Yamaha-BLASTER-Swingarm-yfs200-atv-Swing-arm-_W0QQcmdZViewItemQQhashZitem2a05fce1c5QQitemZ180489085381QQptZMotorsQ5fATVQ5fPartsQ5fAccessories seems even cheaper but ehat do u guys think

 

[hudack]

+3+4+6+8 Yamaha BLASTER Swingarm yfs200 atv Swing arm : eBay Motors (item 180489085381 end time May-02-10 01:52:10 PDT) ok heres the other this link wouldnt work with the other for some reason

 

[brandoz28]

they're from the same company, make sure that you get one for the carrier that you have. they had some problems with cracking in the past but they've added a couple supports and redesigned the shock mount. freek and timsyfz both have the new designs and they seem happy. go through the swingarm shop and ask for the hd swingarm

 

[hudack]

alright well i got the stock carrier witch one would i need lol

 

[hudack]

haha wait nvm figured it out going with the black powder coated one thats for the help

 

[feelsoright03]

Good choice. Im a rep from the swingarmshop and if you have stock carrier you want the black one which was the 2nd one you posted. Also the guy above is right we do have an HD swingarm that is for jumping and such. Let me know how everything turns out. Were always looking for feedback wether it be negative or positive. Hope you enjoy.


~Teddy~

 

[hudack]

yea but im not geting it for a lil im geting hydro brakes then im geting it port and polished and big bore and stuff like that then im geting the swingarm im just doing so research to kno how much money i need to get together

 

[yb200]

yea but im not geting it for a lil im geting hydro brakes then im geting it port and polished and big bore and stuff like that then im geting the swingarm im just doing so research to kno how much money i need to get together

i can extend your stock arm for about 1/2 the price

 

[hudack]

well thats something to realy think about since im puting like 1600 into the motor so moneys gana be a little tight lol

 

[stephen12091985]

yb does good work to.i havent heard no one complain about there swinger that he has done

 

[hudack]

well then im prob gana go with that cuz i wana save some money but dont wana buy cheap stuff also what do u guys think of these wheel spacers Blaster 200 Extended Rear Wheel Axle Hubs Spacers : eBay Motors (item 330376349232 end time May-10-10 07:37:30 PDT)

 

[stephen12091985]

they look nice and seem like they would work ok

 

[brandoz28]

you can get a banshee axle for about the same amount of money if you look around

 

[bagds10]

i found a banshee axle not too long ago on ebay. i think the starting bid was like 25 bucks. i dont know if its still on there but ill check

 

[bagds10]

they got a shee axle buy it now for 75 bucks 25 shipping. or they got a +3 shee axle bidding at 76 bucks.... i dont know how to paste a shortcut or i would have yamaha banshee axle- blaster 2003 straight : eBay Motors (item 110519428567 end time May-13-10 11:26:09 PDT)

 

[hudack]

yea i was thinking of geting a shee axle how much wider are they then the blasters axle

 

[brandoz28]

3.5 inches roughly. thats what i came up with when i measured mine. here's what it looks like with the shee axle...i don't have any from behind with the stocker

 

[hudack]

that looks nice i dont thin that wheel spacer would look that good does all the stuff off the blaster mount up on the shee axle