sunk my blasty today anything i need to do?

[blasterjarred]

yea well i put some gas in there and i think theres water in the crank case and i think im just guna pull the cylender off and bring it to school and do a port job and hone it and drain out the stuff in the crank case and buy a reed spacer to bring the carb back so the boot will fit on it so this dosnt happen agan

 

[ron89]

okk, umm did you try turning the quad on its side and pull the plug and putting it in gear and spinning the tires so it turns it over fast it will help get the water out ..

 

[blasterjarred]

im guna do a port job on it and guna pull the moter and cleen it like crazy so ill just do that when i pull the moter out are the stock con ronds bronze colored?

 

[blasterjarred]

dose the tusk top end gasket kit come with new rings??

 

[hickskateboarder]

yeah if your boot from your airbox doesn't fit on the carb your just askin to get water in the crankcase. i take my blaster thru a pond, get off and let it float like you did, and let it idle in first gear around in the water. i don't get water in my motor cause all my junk is sealed good, and yeah the pipe and carb are under water.

EDIT: i am NOT suggesting to try this.

 

[blasterjarred]

yes i understand but that sounds prity fun only if u could sit on it and it would still float

 

[blasterjarred]

yyayay i got it fixed just flushed out the crank case with some 2 stroke gas three times and put her back to geater and she started up

 

[ron89]

good to hear that you got it running ..

 

[blasterjarred]

yea thanks a lot for the help

 

[ron89]

no prob man ..