stock shock on +4 swinger...
- Thread starter lowkhalbalr
- Start date
As long as the stock mount is in the same place there is no reason it won't work. I have heard that a extended swinger will bascially soften the shock, but for most people that isn't a bad thing.
^^^ yep, it'll soften the shock quite abit but if you're a lighter person then it should be good. If you're a heavier person then it'll be pretty soft and you'll notice it bottoming out
k cool. sounds goood to me
thanx. i prolly end up lengthening the swinger myself. lengthen after the shock mount?
thanx. i prolly end up lengthening the swinger myself. lengthen after the shock mount?
I think most people lengthen before the shock mount and weld in a new mount, but don't quote me on that.
most of what i've seen people do lengthen before the mount and then they weld new mounts in. there is a thread here that i believe tells you how to find where the mount should be to get the most travel. its alot easier to extend it in the section right before the mount and if you do this and follow the directions in that thread to find where the new mount should be that would be your best bet. i bought mine on ebay for $120 shipped though where the guy welded in a 3" section after the shock mount. so it can be done either way
Similar threads
