sprockets and chain links

[95blasta]

I have a Stock set up and was wondering if I went up a tooth in the rear would I have to add a link.seems common sence I would,just wanna double check....if so could I go down one up front and and up one in the back and use the stock chain.
Also if I'm posting in the wrong category sorry,
Please point me to the right one

 

[Blaaster]

Not going to get into mathematics as I do not know how stretched the stock chain is.

What I will advise is that you buy new sprockets complete with a new chain.

 

[Herpderplol]

Buy the stock sizes, get a new chain.

You need to get all three at once, or face disaster

 

[95blasta]

Yes I already kno I must replace all three but I want a little lower gearing and might end up buying the sprockets from a different vendor then the chain.sometimes it's cheaper this way.

 

[Blaaster]

Stock chain should fit, but play it safe get a longer one, you can always punch out a few links if it is too long.

 

[95blasta]

Thanks blaaster,I found a calculator and posted it.its now stickied
At the top of this section

 

[95blasta]

Thanks blaaster,I found a calculator and posted it.its now stickied
At the top of this section