splitting cases
- Thread starter guns4children
- Start date
ya don't.. or sometimes a modified harmonic balancer will work. also need a flywheel puller if you don't have one of those. if you are replacing the crank you will need a crank puller/installer tool too
You need at the very least a flywheel puller. Usually if needed you can split them with a soft rubber mallet and a bunch of light well placed taps not swings light taps.
Some people will tell you this is the wrong way to do it, and it is. But wen i was starting out in my garage thats how i did it and i never damaged a case never had any problems from it at all.P.s. i agree with children using guns under close adult supervision I:I
You need at the very least a flywheel puller. Usually if needed you can split them with a soft rubber mallet and a bunch of light well placed taps not swings light taps.
P.s. i agree with children using guns under close adult supervision I:I
haha thanks. i thought i might get someone over here crying about my name. the guys from banshee hq told me about it. i do have a puller i have everything tore down and when i got to the shift star i found it was welded. now i have rebuild my banshee bottom to top but i have a feeling the star shouldnt be welded. http://i222.photobucket.com/albums/dd218/ronscott54/IMG_20120828_144254.jpg
i dont think the name is a big deal its just a name...banshee hq doesent like us blaster people but who cares
the star does not wanna turn by hand. is it ok to tap on it a bit to get it to spin or is there something wrong if you cant get it to move with your fingers?
turn the drive sprocket or shaft(if you took the sprocket off already) as you try to turn it. that will make it ez to shift the gears
uncalled for man. not here, we don't speak to each other that way unless we are buddies already
