Spark Plug Question?

dodgextreme4x4

New Member
Feb 21, 2010
9
0
0
I rebuilt the top end of my 98 blaster. It runs great for about 30 mins then it starts to bogg down and backfire really bad. I took the spark plug out and its smashed down where there is no gap. What would cause this to be happing. Thanks
 
try a fresh plug and see if it does it again, otherwise pull the head and make sure nothing is in the cylinder and making contact with the plug
 
This is the second time ive tried a new plug and did the same thing runs good for 30 mins then gets boggy and starts backfiring
 
Spark Plug Part No. Stock No. Plug Gap Photo
Standard B8ES 2411 .028

Why does ngk web site say to use the b8es plug but everyone recommends the br8es
 
the ground strap would have to hang down far enough to make contact with the piston or something else in there