I just installed oil injection block off kit. I did everything that know of that i have read on this site and the first time taking it down the road ran good no smoke. Next time began to smoke very bad. If any one could help thankyou
Replace crank seal and leak test engineI put a new gasket on and all holes are plugged. And gas is mixed 32.1
You blocked the oilpump hole ok. Now replace crank sealWas I suppose to take off everything that was connected to oil pump. I took two clips off on the inside of crank
Unless you have a clutch basket holder tool and have performed this before you may have a problem. Not saying you can't do it, just crank seals from Yamaha (oe) are 19.99 apiece. If you damage it installing it,it will continue smoking and using trans oilThanks man appreciate it. Still wondering why that would go bad it was fine before I did block off kit. Guy I bought it from just cut the lines an plugged them. I decided to do it right and buy the kit oh well. Is crank seal hard to do
Its a 04 just unplugged wires from parking brake