Slick #2

[slickerthanyou]

Well, finally got to put the blasty together, and get three heat cycles done, the proper way this time. Thanks to Ken Oconner for hookin a Bro up!

Here is how I did my heat cycles,-Kick it over- let it idle- while blippin the throttle no more than 1/4 every 20 seconds or so (i screwed in the stop on the throttle box for this but ya don't have to)-Ran it for 5 minutes felt the side of the cylinder real warm , ran for another two minutes, blippin the throttle and then felt the cylinder, hot to touch-OUCH! Shut 'er down, it took maybe 1 and 3/4 hours to completely cool down at 70* outside temp.

New bore, piston, rod and bearings, crank bearings too. And of course new case halves as mine blew holes after the piston shattered!:-[ I will get the last two heat cycles done tomorrow and then Tuesday/Wednesday- take'r for a nice easy ride- Do a plug chop and tune it in good. I've got a good hand on this 30MM OKO and I'm pretty sure the jetting is very close!

Oh ya I switched to Super M mix, 32:1. Instead of techniplate R50 gonna use that for the chainsaw!

More to come....

 

[Awk08]

awsome slick, see ya in a few weeks after i get my bikes mainteneced

 

[slickerthanyou]

Forgot to add a few pics, she has had some cosmetic stuff done too during the transplant...
Heel guards-

Tool holder, (made out of a small oxygen cylinder with fernco rubber end cap)-

Inside of tool holder-

Left side newish tank cover and front hood not painted!-

Rightside-

Front shot-

 

[tyler1blaster]

that tool holder is "slick"

 

[CARNZ]

pretty sweet setup, i like that tool holder, good idea

 

[Whitty21]

i LOVE that tool holder man, and that is a nice looking Boxer in the background there

 

[scotj77]

lookin good slick!

 

[blasterfreek30]

awesome job slickster, it wouldve been nice t o have that tool case full of tools that night with techs blastys on the mountain lol

 

[slickerthanyou]

Thanks fellas!

awesome job slickster, it wouldve been nice t o have that tool case full of tools that night with techs blastys on the mountain lol

Yes I made sure I have a 10mm socket and rachet in there for sure!

 

[Whitty21]

nice man, i am excited to be running a similar engine to you

 

[slickerthanyou]

i LOVE that tool holder man, and that is a nice looking Boxer in the background there

Thanks, he loves to be photographed, he just got better, someone tried to poison him with a tainted hotdog. Long story short, someone doesn't want us to testify against his brother. That's all I can say for now... Gotta lot of sh*t going down in the hood lately , Lock and load fellas!!

 

[79 bronco]

That is awesome...

 

[slickerthanyou]

79 ever get your figured out??

 

[79 bronco]

79 ever get your figured out??

Not exactly, but i do have low compression. Did you see my CT240 compression test video i posted...

 

[slickerthanyou]

Nope going to look now....

 

[PGH PA 2 STROKE]

wow thats a nice quad Bob we should go rideing somtime .......are those my HUBS lol

 

[slickerthanyou]

wow thats a nice quad Bob we should go rideing somtime .......are those my HUBS lol

Why yes they are and I'll be ready for a ride by end of the week, hit me up!

 

[TechBlaster]

Thanks fellas! Yes I made sure I have a 10mm socket and rachet in there for sure!

haha, yeah the 10mm ratchet woulda been huge, but thank god I have MAD wrenching skills in the dark!!!! I:I

And of course thank god for my boys there, no doubt...

The bike looks great Slick, love the tool case, that is wicked!!! Can't wait to ride with ya when ya have YOUR piece bro!!

 

[little3mil]

wish you luck with the motor slick

 

[slickerthanyou]

Thanks bro! Have one more heat cycle I'll get today and then it will be ridin time.