Should i?
- Thread starter xsicxxx
- Start date
should be fine nice oil pick best stuff i ever tried, and its not gonna be oil injected its a 240 motor he got
ya you should be running 32:1 if your running 40:1 it might be a little rich and thats not bad but if you want more power 32:1 is you best choice
oo no lol nothing to worry about lol if its rich the more it will be safe it will be a little boogy you safe
you've got it backwards. 40:1 is 40 parts gas and 1 part oil. 32:1 would be 32 gas and 1 oil so that = more oil per gas.
40:1 is more power and isnt bad. if its been run like that, keep that because thats the way the engines setup. if you change it, now you have more oil, so your running leaner because theres less gas and the same air. theres 2 lean/rich, 1 is with gas/oil mix and ones fuel/air mix.
r50 is the synthetic klotz. i like the technaplate alot better but if i was running the r50 you would probably have better results with the tried and true 40-1 instead ,see the synthetics have a high flash point and are designed for the higher ratios .the technplate is semi synthetic and has castorburns clean and protects it works fine at lower ratios like 28-1 or 32-1 .personaly I like more oil mixed if possible ,never seen an engine get ruined from too much premix oil but i have seen the opposite quite a few times lol
Very true I run the same exact oil as you at 32:1 and my bike hauls and I feel a little safer knowing that it'll save my motor a little more.:-D I have close to the same mods as you and i mean i would deffinitly go to 32:1
