ok i messed with the TORS today and nothing still dies. i messed with the idle screw and nothing changes when i turn it. next i guess i'll try the sensor that was talked about above. im puzzled and pissed at the same time.
Runs but wont idle
- Thread starter New24wheelin
- Start date
Ok you see the other wire going in to the throttle box with one gold screw that's it unscrew the gold screw and take the little black sensor out and tape it and put it under the handle bar box it worked great for me that's all I did and it idle instanly I pulled it out and it idle perfect I put it back it died lol
hi there i have a 1999 blaster that i am rebuilding. my problem i am having right now is that i have no take off power. when i get going it will come up to speed but it wont take off like it use to. it is very boggey. this is what i have done so far new plug,rebuilt carb, bought a new rebuilt carb check all the jets in carb check the reeds. oh and compression is good whats give it the power?
hi there i have a 1999 blaster that i am rebuilding. my problem i am having right now is that i have no take off power. when i get going it will come up to speed but it wont take off like it use to. it is very boggey. this is what i have done so far new plug,rebuilt carb, bought a new rebuilt carb check all the jets in carb check the reeds. oh and compression is good whats give it the power?
Click on the pic above and see the red circle remove that and start it and it will idle and put it back and it wont and take it out and tape it up and hide it put the cover back on that ur good togo