running Lean signs?

[Unstock240]

I know pulling the choke out should kill it, if not it is lean. When its warmed up i pull the choke out 1 click. It doesn't seem to run better but the the same as with choke off. Would no effect with the choke half way on also be a lean sign? My plug was previously ran rich so I cant get a good reading. It also will slightly bog on low throttle take off, but i doubt its rich because the head temp was 226 F. I think it might be on the hot side?

 

[bundyho1]

So what jets are you running now?

 

[cirame1]

if the bike bogs down ur prob still rich and if u were runnign rich it would give u a reading on the plug pretty much instantly even after a rich cycle if u changed ur jets or sumthin. a sign would be revving up at idle by itslef or a high idle. i would check ur jets and let us know wat u got and do some plug chops

 

[CWHutzell]

if its acting sluggish its probibly rich,if its hesitating its more then likely lean.Only real way you can check if your lean or rich is checking the plugs,you should always use a new plug when you check jetting old plugs will tell nothing.

 

[Unstock240]

I figured an old plug wouldn't do much. It has plenty of power, the bog is just throughout maybe like 1/8 to 1/4 throttle. I know the pilot and everything seem to be set it idles and revs perfect. The bog is only while its in gear and I take off. It still has the dynojet 360 crap in. I have all the mikuni sizes i need. Just confused because the plug resembles rich but yet it is running very hot. I think its getting to much air. when I put a rag over the airbox it would run worse with choke on not better like it should be. I still dont understand why my plug would be semi wet though?

 

[FLOTEK]

FYI i think they charge like 1.79$ at autozone for a B8es NGK plug
might be a good investment for ya'

 

[Unstock240]

I have a ngk BR8ES is that the same as you mention? The R has something to do with electronic interferences which would be better? I really want to mess with it but it is 10 degrees out not the best time for jetting.