rebuild

[Auger50]

where is the best place to buy a new head and cylender and a piston kit. i have a 89 blaster im rebuilding can 06 or newer parts fit onto my motor? will be posting pics laterI:I

 

[Larry's Shee]

You don't need a new head or cylinder. You can take it to a local shop, get the cyl measured, determine correct new size to bore to. Or can send it to a builder.

Other than some electrical and hydro brakes on 03+, Blasters are all the same. Other than colors

 

[Auger50]

where should i get the piston kit?

 

[Larry's Shee]

If you go to a local shop, just get it from them. If you take it to a machine/engine shop either Egay, Rocky Mountain, Vito's, or were ever, this is after they measure it so you can get the correct size, then they bore and hone to fit it. Or you can send it to any of the builders listed in the engine section. Or this is who I use:Yamaha YFS200 Blaster Piston Kit Rings Cylinder Boring | eBay , he's local to me. Have known Mike over ten years.